Climbing Pre-Clip Selfie Stick Attachment Chonbo Stick

This is a pre-clipping tool for climbing.
There are two ways to use it.
We have uploaded a video demonstrating its use on YouTube.
Please search for プリクリップ棒 3Dプリンタ (pre-clip stick 3D printer) and watch it.

① Attaching a quickdraw with rope to the tool
Hook the quickdraw onto the tool with the carabiner gate open, then pull down to close the gate.

② Attaching rope to an already placed quickdraw
With the rope looped around the gate, pull one end of the rope to push open the gate and attach it.
[Tips for use]
・When lifting, if the weight of the rope is applied, the rope may slip. Therefore, hold the rope (both sides) together with the tool.
・When attaching to the gate, hold one side of the rope with the tool, and pull the other end of the rope with your other hand.

This product is compatible with the standard 1/4 inch screw found on selfie sticks for action cameras, etc.
*You can find these by searching for 1/4 selfie stick on Amazon, etc. Please choose one with a swivel function.
*Many sticks with swivel functions are short, so we also sell separate attachments for swivel sticks and sticks themselves.
(We also sell a separate attachment that can be fitted to the tip of a PAMO brush.)

Can be used with both wire gate and keylock gate carabiners.
*This product is only the pre-clip attachment; quickdraws and sticks are not included.

It can be used with gates approximately 11-12mm wide, but we can also custom-make it to fit other sizes if requested.

As this is a 3D printed product, please excuse any minor imperfections like burrs that do not affect functionality.

Free climbing, alpine climbing, Petzl, Black Diamond, Metolius, quickdraw, draw, clip stick, quickdraw, cam, gear